Outlet and Switch Repair in Salmon Arm
A dead plug, a warm cover plate, or a GFCI that will not reset. Call now.
Most outlet calls in Salmon Arm are one device: a plug that went dead, a switch that no longer clicks cleanly, or an outdoor receptacle that quit after a wet winter. Some of those are a loose connection. Some are the first sign the circuit is in trouble. We test it before we sell you a new plate.

What you can check first
- Look at the panel for a breaker that sits between on and off. Reset it once, firmly off, then on.
- Press reset on GFCI outlets in the kitchen, bathrooms, garage, and outside. One of them can kill plugs in another room.
- Unplug a heater, a kettle, or a shop tool that was running when the breaker opened.
Stop there if the plate is warm, cracked, or blackened, or if the breaker trips again at once. Those go to the emergency electrician page.
Outdoor plugs and the lake
Cottages in Sorrento, Blind Bay, and Sicamous lose outdoor receptacles to weather. A cover that does not close, a plug that only works on dry days, or power run toward a dock should be looked at. Power near water needs GFCI protection. Tell us if the receptacle is outside or on a boathouse. Do not open the box yourself.
A typical outlet or switch replacement, and a GFCI, are listed on thecost page. Travel to a lake property can change the figure. We confirm the price before we start.
Common questions
Why did my outlet stop working?
A dead outlet is often a tripped breaker, a tripped GFCI, a loose device, or a fault further along the circuit. Check the breaker and the test-reset buttons on GFCI outlets in the kitchen, bathroom, garage, and outside. If it is warm, scorched, or it sparked, leave it alone and call.
Where do I need a GFCI outlet?
Kitchens, bathrooms, garages, and outdoor plugs are the usual places a GFCI is required. Docks and boathouses near the lake need the same kind of protection. We confirm what your house needs. Code details change, so we check the current rule for that room.
Is a warm outlet an emergency?
A plate that is warm, discoloured, or smells of hot plastic should be treated as urgent. Unplug what you can without touching a damaged face, leave the breaker off if you know which one it is, and call. A switch that is only stiff can wait for a daytime visit.
